P
AGE
12
46512-0999 <90-00083>
Below are the instructions for entering a system name.
MAP N
AME
A T/Shell configuration must have a name. If there are existing
configurations, a default box appears with their names.
To select an existing name:
1.
Use the Tab key to highlight a name.
2.
Press Enter.
3.
If the configuration has a password, type it and press Enter. If
there is no password, just press Enter. To create a password or to
change an existing one, refer to the next section on Edit Pass-
word/Config.
To create a new system name:
1.
Enter a name.
The name can have a maximum of seven characters. The name
must use characters that form a valid DOS file name. You can use
all alphabetic and numeric characters except those that are re-
served by DOS, such as the period and space.
2.
Press Enter.
3.
The following question appears at the bottom left corner of the
screen:
Not there. Wish to add (Y/N)?
Type Y to add the new name. If N is typed, you will be prompted
for another name.
4.
In the Type field, use the Tab key to choose either 64 or 128 alarm
displays that the MAP will report. This field defaults to 128.
5.
Press Enter.
E
DIT
P
ASSWORD
/C
ONFIG
The Edit Password/Config option lets you to create or change the
following:
♦
A password to access the configuration.
♦
The address of the 46020 module.
♦
A description to identify the configuration.
MAP SYSTEM DEFINITION
