46512-0999 <90-00083>
P
AGE
29
3.
Go to the the Find subsection for instructions on how to configure
devices that use TABS protocol.
4.
Go to the the Edit subsection for instructions on how to edit a con-
figuration.
Find - Selects a device to configure or selects an existing con-
figuration to edit.
Edit - Edits an existing configuration.
Next - Selects the next configuration to edit.
Previous - Selects the previous configuration.
Delete - Deletes the configuration. When you select this option,
the message Delete the current address? (Y/N) appears. Type
Y to delete the configuration. Type N if you do not want to delete
the configuration.
Below is the 41 Edit screen for a device that communicates with
TABS protocol. The MAP Alarms Level field does not appear if
no TABS devices are configured.
F
IND
To configure a TABS device:
1.
Highlight Find.
2.
Press Enter.
3.
In the TABS Address field, type the address of the device. Accept-
able values are 0-31.
4.
Press Enter.
N
OTE
:
The address setting on the
device must be the same as
the address you type.
MAP SYSTEM DEFINITION
CONTINUED
. . .