![background image](http://html.mh-extra.com/html/danfoss/vlt-midi-drive-fc-280/vlt-midi-drive-fc-280_programming-manual_506511069.webp)
7-06 Speed PID Lowpass Filter Time
Range:
Function:
0.6
0.6
f
g
= 10 Hz
175ZA293.11
Feedback
Disturbed feedback signal
t (Sec.)
t (Sec.)
Filtered feedback signal
Lowpass filter
Feedback
Illustration 4.15 Feedback Signal
7-07 Speed PID Feedback Gear Ratio
Range:
Function:
1
*
[0.0001 - 32 ]
Par 7-07=1.00
Par 7-07=n1/n2
130BA871.10
Motor
n1
n2
Illustration 4.16 Speed PID Feedback Gear
Ratio
7-08 Speed PID Feed Forward Factor
Range:
Function:
0 %
*
[0 - 500 %] The reference signal bypasses the speed
controller by the amount specified. This
feature increases the dynamic performance
of the speed control loop.
7-12 Torque PID Proportional Gain
Range:
Function:
100 %
*
[0 - 500 %] Enter the proportional gain value for the
torque controller. Selection of a high value
makes the controller react faster. Too high
a setting leads to controller instability.
7-13 Torque PID Integration Time
Range:
Function:
0.020 s
*
[0.002 - 2 s] Enter the integration time for the torque
controller. The lower the integration time,
the faster the controller reacts. However,
too low a setting leads to controller
instability.
7-20 Process CL Feedback 1 Resource
Option:
Function:
The effective feedback signal is made up
of the sum of up to 2 different input
signals. Select which input is treated as
the source of the first of these signals.
The 2nd input signal is defined in
parameter 7-22 Process CL Feedback 2
Resource
.
[0]
*
No function
[1]
Analog Input 53
[2]
Analog Input 54
[3]
Frequency input
29
[4]
Frequency input
33
7-22 Process CL Feedback 2 Resource
Option:
Function:
The effective feedback signal is made up
of the sum of up to 2 different input
signals. Select which input is treated as
the source of the 2nd of these signals.
The first input signal is defined in
parameter 7-20 Process CL Feedback 1
Resource
.
[0]
*
No function
[1]
Analog Input 53
[2]
Analog Input 54
[3]
Frequency input
29
[4]
Frequency input
33
7-30 Process PID Normal/ Inverse Control
Option:
Function:
Normal and inverse controls are implemented by
introducing a difference between the reference
signal and the feedback signal.
[0]
*
Normal Sets process control to increase the output
frequency.
[1]
Inverse Sets process control to decrease the output
frequency.
Parameter Descriptions
Programming Guide
MG07C102
Danfoss A/S © 12/2015 All rights reserved.
67
4
4
Содержание VLT Midi Drive FC 280
Страница 1: ...Programming Guide VLT Midi Drive FC 280 vlt drives danfoss com ...
Страница 2: ......
Страница 143: ...Index Programming Guide MG07C102 Danfoss A S 12 2015 All rights reserved 141 ...