Danfoss VLT AutomationDrive FC 360 Скачать руководство пользователя страница 34

Страница: 34 / 60

9-93 Changed Parameters (4)

Array [116]
No LCP access
Read only

Range:

Function:

[0 - 9999 ] This parameter shows a list of all the frequency

converter parameters deviating from default
setting.

9-94 Changed Parameters (5)

Array [116]
No LCP Address
Read only

Range:

Function:

[0 - 9999 ] This parameter shows a list of all the frequency

converter parameters deviating from default
setting.

6.4 Parameter Group 12-** Ethernet

6.4.1 12-0* IP Settings

12-01 IP Address

Range:

Function:

[0 - 4294967295 ] Configure the IP address of the option.

Read-only, if

parameter 12-00 IP Address

Assignment

is set to DHCP or BOOTP.

12-02 Subnet Mask

Range:

Function:

[0 - 4294967295 ] Configure the IP subnet mask of the

option. Read-only, if

parameter 12-00 IP

Address Assignment

is set to DHCP or

BOOTP.

12-03 Default Gateway

Range:

Function:

[0 -
4294967295 ]

Configure the IP default gateway of the
option. Read-only, if

parameter 12-00 IP

Address Assignment

is set to DHCP or

BOOTP. In a non-routed network, this
address is set to the IP address of the I/O
device.

12-04 DHCP Server

Range:

Function:

[0 - 2147483647 ] Read-only. Show the IP address of the

found DHCP or BOOTP server.

12-05 Lease Expires

Range:

Function:

Size related

[ 0 - 0] Read-only. Show the lease time left for

the current DHCP-assigned IP address.

12-06 Name Servers

Range:

Function:

[0 - 4294967295 ] IP addresses of domain name servers.

Can be automatically assigned when
using DHCP.

12-07 Domain Name

Range:

Function:

[0 - 48 ] Domain name of the attached network. Can be

automatically assigned when using DHCP network.

12-08 Host Name

Range:

Function:

[0 - 48 ] Logical (given) name of option.

NOTICE

The display of the frequency converter only
shows the first 19 characters, but the
remaining characters are stored in the
frequency converter. If hardware switches
are different from all ON or all OFF, the
switches have priority.

12-09 Physical Address

Range:

Function:

[0 - 17] Read-only. Shows the physical (MAC) address of the

option.

6.4.2 12-1* Ethernet Link Parameters

Apply to the whole parameter group.

Index [0] is used for port 1, and index [1] is used for port
2.

12-10 Link Status

Read-only. Shows the link status of the Ethernet ports.

Option:

Function:

[0]

No Link

[1]

Link

12-11 Link Duration

Range:

Function:

Size related

[ 0 - 0] Read-only. Shows the duration of the

present link on each port in dd:hh:mm:ss.

12-12 Auto Negotiation

Option: Function:

Configure auto negotiation of Ethernet link
parameters, for each port: ON or OFF.

[0]

Off

Link Speed

and

Link Duplex

can be configured in

parameter 12-13 Link Speed

and

parameter 12-14 Link

Duplex

Parameters

PROFINET

MG06G102

Содержание VLT AutomationDrive FC 360





























































Результаты поиска

Содержание VLT AutomationDrive FC 360

Отзывы:

Бренды по названию

Популярные бренды

Danfoss VLT AutomationDrive FC 360, Руководство по программированию

Результаты поиска

Содержание VLT AutomationDrive FC 360

Отзывы:

Бренды по названию

Популярные бренды