3.10.6 8-8* FC Port Diagnostics
These parameters are used for monitoring the Bus communi-
cation via the Port.
8-80 Bus Message Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of valid telegrams
detected on the bus.
8-81 Bus Error Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of telegrams with
faults (e.g. CRC fault), detected on the bus.
8-82 Slave Messages Rcvd
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of valid telegrams
addressed to the slave, sent by the frequency
converter.
8-83 Slave Error Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of error
telegrams, which could not be executed by the
frequency converter.
3.10.7 8-9* Bus Jog
8-90 Bus Jog 1 Speed
Range:
Function:
100 RPM
*
[0 - par. 4-13
RPM]
Enter the jog speed. This is a fixed
jog speed activated via the serial
port or fieldbus option.
8-91 Bus Jog 2 Speed
Range:
Function:
200 RPM
*
[0 - par. 4-13
RPM]
Enter the jog speed. This is a fixed
jog speed activated via the serial
port or fieldbus option.
Parameter Descriptions
FC 300 Programming Guide
MG.33.MB.02 - VLT
®
is a registered Danfoss trademark
109
3
3
Содержание VLT AutomationDrive FC 300
Страница 1: ...MAKING MODERN LIVING POSSIBLE Programming Guide VLT AutomationDrive...
Страница 218: ...www danfoss com drives MG33MB02 130R0334 MG33MB02 Rev 2010 10 07...
Страница 219: ......
