Danfoss vlt aqua, Инструкция по эксплуатации, Страница: 99 / 184

6-01 Live Zero Timeout Function
Option: Function:
Select the timeout function. The function set in par.6-01 Live Zero Timeout Function will be activated
if the input signal on terminal 53 or 54 is below 50% of the value in par.6-10 Terminal 53 Low
Voltage , par. 6-12 Terminal 53 Low Current , par.6-20 Terminal 54 Low Voltage or par. 6-22 Terminal
54 Low Current for a time period defined in par.6-00 Live Zero Timeout Time . If several timeouts
occur simultaneously, the adjustable frequency drive prioritizes the timeout functions as follows:
1. par.6-01
Live Zero Timeout Function
2. par. 8-04
Control Timeout Function
The output frequency of the adjustable frequency drive can be:
• [1] frozen at the present value
• [2] overruled to stop
• [3] overruled to jog speed
• [4] overruled to max. speed
• [5] overruled to stop with subsequent trip
If you select set-up 1-4, par. 0-10
Active Set-up
must be set to
Multi Set-up
, [9].
This parameter cannot be adjusted while the motor is running.
[0] * Off
[1] Freeze output
[2] Stop
[3] Jogging
[4] Max. speed
[5] Stop and trip
6-10 Terminal 53 Low Voltage
Range: Function:
0.07 V* [0.00 - par. 6-11 V] Enter the low voltage value. This analog input scaling value should correspond to the low reference/
feedback value set in par.6-14
Terminal 53 Low Ref./Feedb. Value
.
6-11 Terminal 53 High Voltage
Range: Function:
10.00 V* [par. 6-10 - 10.00 V] Enter the high voltage value. This analog input scaling value should correspond to the high refer-
ence/feedback value set in par.6-15
Terminal 53 High Ref./Feedb. Value
.
VLT
®
AQUA Drive
Instruction Manual
8 How to program the adjustable frequency
drive
MG.20.M5.22 - VLT
®
is a registered Danfoss trademark
8-29
8