Danfoss vlt aqua, Инструкция по эксплуатации, Страница: 114 / 184

[16] Select preset ref 6
[17] Select preset ref 7
[18] Select ramp 1
[19] Select ramp 2
[22] Run
[23] Run reverse
[24] Stop
[26] Dcstop
[27] Coast
[28] Freeze output
[29] Start timer 0
[30] Start timer 1
[31] Start timer 2
[32] Set digital out A low
[33] Set digital out B low
[34] Set digital out C low
[35] Set digital out D low
[36] Set digital out E low
[37] Set digital out F low
[38] Set digital out A high
[39] Set digital out B high
[40] Set digital out C high
[41] Set digital out D high
[42] Set digital out E high
[43] Set digital out F high
[60] Reset Counter A
[61] Reset Counter B
[70] Start Timer 3
[71] Start Timer 4
[72] Start Timer 5
[73] Start Timer 6
[74] Start Timer 7
23-02 OFF Time
Array [10]
Range: Function:
0 N/A* [0 - 0 N/A] Sets the OFF time for the timed action.
NOTE!
The adjustable frequency drive has no back-up of the clock function, and the set
date/time will reset to default (2000-01-01 00:00) after a power-down unless a
Real Time Clock module with back-up is installed. In par. 0-79
Clock Fault
it is
possible to program for a warning in case the clock has not been set properly,
e.g., after a power-down.
8 How to program the adjustable frequency
drive
VLT
®
AQUA Drive
Instruction Manual
8-44
MG.20.M5.22 - VLT
®
is a registered Danfoss trademark
8