Option
Function
[123]
Master marker
NOTICE
This option is available only with IMC software version 48.XX.
Normally-open contact. Serves as input for master marker signal during marker synchronization based
on the option selected in
parameter 3-33 Sync. Mode & Start Behavior
.
[124]
Master marker
inv.
NOTICE
This option is available only with IMC software version 48.XX.
Normally-closed contact. Activates master marker signal for marker synchronization based on the option
selected in
parameter 3-33 Sync. Mode & Start Behavior
.
[125]
Follower mark-
er
NOTICE
This option is available only with IMC software version 48.XX.
Normally-open contact. Serves as input for follower marker signal during marker synchronization based
on the option selected in
parameter 3-33 Sync. Mode & Start Behavior
.
[126]
Follower mark-
er inv.
NOTICE
This option is available only with IMC software version 48.XX.
Normally-closed contact. Serves as input for follower marker signal during marker synchronization based
on the option selected in
parameter 3-33 Sync. Mode & Start Behavior
.
[231]
Power limit
mot.
Serves as input to activate the power limit function in the motor mode. See
parameter group 4-8* Power
Limit
.
[232]
Power limit
gen.
Serves as input to activate the power limit function in the generating mode. See
parameter group 4-8*
Power Limit
.
[233]
Power limit
both
Serves as input to activate the power limit function in both the motor and the generating mode. See
parameter group 4-8* Power Limit
.
[234]
Light load +
evacuation
Serves as input to activate the power limit function in both the motor and the generating mode. See
parameter group 4-8* Power Limit
.
Table 15: 5-12 Terminal 27 Digital Input
Option
Function
Functions are described in
parameter group 5-1* Digital Inputs
.
[0]
No operation
[1]
Reset
[2]
Coast inverse
[3]
Coast and reset inv.
[4]
Quick stop inverse
Parameter Setup
Operating Guide | VLT® Extended Relay Card MCB 113
AQ322553864968en-000101 / 130R0353
26 | Danfoss A/S © 2020.01