![background image](http://html1.mh-extra.com/html/danfoss/control-c-2/control-c-2_operators-manual_3398135061.webp)
9
Error messages
9.1
Error message “Oil filter contaminated”
If an oil filter is used in the machine (depends on the machine type)
and this filter is contaminated, an error message is displayed.
1.
Replace oil filter in accordance with the instructions given in the
Operation Manual of the machine.
2.
Acknowledge error message by pressing the
button and the
OK
button in the message window.
The error message may also appear in the event of a low ambient
temperature. Operate the machine in the idle mode for several
minutes. If the message occurs again after restart, replace the oil
filter.
If the error message is acknowledged without having replaced the
oil filter before, the message will be displayed again when the mo-
tor is restarted.