![background image](http://html1.mh-extra.com/html/danfoss/control-c-2/control-c-2_operators-manual_3398135022.webp)
The tool automatically opens after the forming pro-
cess.
The tool does not automatically open after the form-
ing process.
Enter additional settings (see following screen).
Help (only if available, otherwise logo)
Back to selection of product range.
Favourites even remain unchanged if the data are reloaded from a
USB storage medium.
Enter additional settings
Enter opening diameter.
The current diameter at which the machine is set is
accepted as opening diameter.