Cascade Controller Option
■
12. Remove Wiring Clamp Mounting Fixture
•
Option card insulation pad is designed to use top
most cable wiring clamp screw hole for attaching.
•
Use screw driver to remove top most wiring clamp.
■
13. Reconnect VLT Control Terminals and
Secure Option Card InsulationPad
•
Reconnect VLT control terminals removed in step
2 by pressing firmly into corresponding
terminal socket.
•
Crease option card insulation pad flap and insert
into slot in side of control card cassette.
•
Attach insulation pad to top most clamp position
with one screw from removed wiring clamp.
•
Route VLT control terminal wiring through
bottom left wiring clamp and fasten.
■
14. Final Reassembly
•
Secure access cover to internal VLT components.
•
Replace LCP keypad by positioning guide slots
at bottom of cradle and snaping into place.
•
Attach terminal protective cover by positioning
guide pins at bottom of cover into control card
cassette and snaping into place.
■
Transmitter wiring
Please refer to chapter 10, Feedback
Transmitter Wiring.
MG.60.I3.02 - VLT is a registered Danfoss trademark
16