Dando DUKE STAGE IV, Руководство по эксплуатации и техническому обслуживанию, Страница: 21 / 400

l. Relatively harmless materials can cause irritation leading to more harmful
effects by repeated or prolonged exposure so that every effort should be
made to avoid inhaling dust, fumes or smoke. Should such conditions have to
be endured as a temporary measure, suitable protective equipment should
be used.
m. Similarly, prolonged or repeated contact with the skin of certain substances,
chemicals, oils or other fluids can be harmful. Under these circumstances,
protective gloves/clothing should be worn, and/or barrier creams used. Any
such skin contacts should be washed before eating food, and this should not
be consumed in the working or contaminated area.
n. Personnel should be fully protected against any hazard likely to be incurred
in carrying out their work. Protective clothing and equipment should therefore
be issued, maintained in good order and replaced when necessary.
o. Rig personnel should wear only close-fitting clothing, preferably distinctly
coloured overalls. Clothing should be kept clean by frequent washing, and
each crew member should have a clean change of work clothes on location
at all times. Particular care should be taken to ensure that drawstrings to
hoods or other items of clothing are not left dangling so as to become
entangled in any moving parts.
p. If overalls are not worn, long-sleeved shirts with tails tucked in will provide
protection against sunburn, insect bites, scratches, hazardous chemicals and
flash burns.
q. Safety helmets must be worn by members of the drilling crew and visitors to
the site. Safety boots or safety wellingtons should also be worn.
r. When working on or adjacent to the public highway, a top coat, jerkin or
waistcoat, with fluorescent markings must be worn at all times.
s. The use of gloves whenever practicable is recommended. Gloves prevent
minor injuries when employees are handling rough materials or skin irritants.
Only short, tight fitting gloves should be worn. Gauntlets may become caught
in the machinery and workers may be pulled into moving machinery if they
wear them.
t. Hairnets should be worn by persons with dangerously long hair. Loose
clothing, i.e. trailing scarves, ties etc. should be avoided, especially when
working near rotating machinery.
u. Rig personnel should never wear finger rings or bracelets while working.
v. Eye protection is of the utmost importance. An eye injury, no matter how
slight, should receive prompt medical attention. Even a slight eye injury may
lead to serious complications.
w. The correct eye protection should be provided and should be maintained in
good condition on each drilling site. Employees should wear approved safety
glasses or goggles when chipping, grinding, scraping, buffing, breaking or
cutting any metal or material that involves a flying chip hazard.
15