46
•
Xtium-CL PX4 Reference
Xtium-CL PX4 User's Manual
Output LUT Availability
The following table defines the supported output LUT (look up tables) for the Xtium-CL PX4. Note
that unsupported modes are not listed.
Number of Digital
Bits
Output Pixel
Format
LUT Format
Notes*
8
8
MONO 8
MONO 16
8-in, 8-out
8-in, 16-out
8 bits in 8 LSBs of 16-bit
10
MONO 8
10-in, 8-out
10
MONO 16
10-in, 16-out
10 bits in 10 LSBs of 16-bit
12
MONO 8
12-in, 8-out
8 MSB
12
MONO 16
12-in, 16-out
12 bits in 12 LSBs of 16-bit
8 x 3 (RGB)
RGB888
8-in, 8-out
8 x 3 (RGB)
RGB8888
8-in, 8-out
10 x 3 (RGB)
RGB888
RGB8888
RGB101010
RGB16161616
10-in, 8-out
10-in, 8-out
10-in, 10-out
10-in, 16-out
10 bits in 10 LSBs of 16-bit
12 x 3 (RGB)
RGB888
RGB8888
RGB101010
RGB16161616
12-in, 8-out
12-in, 8-out
12-in, 10-out
12-in, 16-out
12 bits in 12 LSBs of 16-bit
*When no LUTs are available or LUTs are disabled, the data is packed in the LSBs of the target
destination.
Table 8: Output LUT Availability
Xtium-CL PX4 Supported Parameters
The tables below describe the Sapera capabilities supported by the Xtium-CL PX4. Unless specified,
each capability applies to all configuration modes and all acquisition modes.
The information here is subject to change. The application needs to verify capabilities. New board
driver releases may change product specifications.
Sapera describes the Xtium-CL PX4 family as:
•
Board Server: Xtium-CL_PX4_1
•
Acquisition Module: dependent on firmware used
Camera Related Capabilities
Capability
Values
CORACQ_CAP_CONNECTOR_TYPE
CORACQ_VAL_CONNECTOR_TYPE_CAMLINK (0x2)
CORACQ_CAP_CONNECTOR_CAMLINK
(Pin – 01, Pin – 02, Pin – 03, Pin - 04)
CORACQ_VAL_SIGNAL_NAME_NO_CONNECT (0x1)
CORACQ_VAL_SIGNAL_NAME_PULSE0 (0x8)
CORACQ_VAL_SIGNAL_NAME_PULSE1 (0x10)
CORACQ_VAL_SIGNAL_NAME_GND (0x4000)
Table 9: Camera Related Capabilities
