12
Piranha4 8K Camera Color User's Manual
03-032-20156-00
Teledyne DALSA
[ADD MECHANICAL FROM PDF]
Figure 6: Camera Mechanical with External Heat Sink
Camera Mounting and Heat Sink Considerations
The Piranha4 cameras ships with two heat sinks installed and ideally positioned to allow close spacing of
the cameras. These heat sinks are designed to provide adequate convection cooling when not obstructed
by enclosures or mounting assemblies.
Teledyne DALSA recognises that each customer’s application can be unique. In consideration, the P4
camera heat sinks have been designed in such a way that they can be repositioned on the different faces
of the camera or removed entirely, depending on the mounting configuration and its heat sinking
potential.
Repositioning or removal of the heat sinks must be performed with care in order to avoid temperature
issues. The camera has the ability to measure its internal temperature. Use this feature to record the
internal temperature of the camera when it is mounted in your system and operating under the worst
case conditions. The camera will stop outputting data if its internal temperature reaches 75 °C.
1
1
2
2
3
3
4
4
A
A
B
B
UNLESS OTHERWISE SPECIFIED
1. UNITS: MM
2. DRAWING PER
ASME Y14.5M-1994
3. TOLERANCES:
LINEAR ±0.15
ANGLES ±0.5
SURFACE FINISH
AUTHOR
APPROVED BY
APPLICATION/PROJECT
TITLE
DWG NO.
PART NO.
REV
SIZE
SCALE
VALID WHEN PRINTED ON SIZE PAPER
OF
PROPRIETARY
THIS DOCUMENT AND THE INFORMATION IT CONTAINS ARE PROPRIETARY TO DALSA INC.. THIS DOCUMENT MUST NOT
BE DUPLICATED, OR ITS CONTENT USED OR DISCLOSED (IN WHOLE OR IN PART) WITHOUT PERMISSION FROM DALSA INC.
3.2
DATE
SHEET
APPROVALS
M. OLA
P4
APR 27/2011
04
NTS
605 McMurray Road
Waterloo, ON
CANADA, N2V 2E9
Phone: (519) 886-6000
Fax: (519) 886-8023
Website: www.dalsa.com
DALSA
THIRD ANGLE PROJECTION
PIRANHA 4 - 8K CAMERA ASSEMBLY
B
2
2
B
03-129-20033
(1
30
)
OPTIONAL EXTERNAL HEAT SINK (2X)
