20
VIP-4060 Configuration Tabs
Display Mode
Display mode
allows the user to select video sources and load images to display as well as choose built-in
test patterns from the
Display mode
drop-down list.
Figure 49
shows the available options. Refer to the
sections below for additional information on each display mode:
Test pattern
,
DVI
,
SDI
,
VMax
,
Custom
Image
, and
Module pattern
.
Figure 49:
Display Mode Drop-Down List
Test Pattern
Selecting
Test pattern
from the
Display mode
drop-down list triggers the drop-down list of
Test
patterns
as shown in
Figure 50
. Test patterns are
used during display installation and troubleshooting,
and to test display operation when no video sources
are available.
When
Test pattern
is selected, sharpness is no longer an
adjustable value in the color adjustment tools.
Note:
Test patterns play immediately when selected,
interrupt any currently playing video, and continue to run
until a new selection is made from the
Display mode
drop-down list.
Refer to the table below for a list of all available test patterns and their descriptions.
Test Pattern
Description
None
No test pattern.
Color Diagonals
Displays scrolling red, green, and blue diagonal lines from left to right across the display.
All Off
Displays black on the entire display, as the LEDs are turned off.
All On
Displays red, green, blue, and white on the entire display.
All On Red
Displays red on every pixel of the display.
All On Green
Displays green on every pixel of the display.
All On Blue
Displays blue on every pixel of the display.
All On White
Displays white on every pixel of the display.
Module Id
Displays a pattern that numbers each display module.
Figure 50:
Test Pattern List
