6
First-Time System Setup & Launch
Finding the VIP-4060 Network Internet Protocol (IP) Address
After installing the DisplayFind program, follow the steps below to find the network IP address:
1.
Start the
DisplayFind
application.
2.
Click
Find Displays
. Refer
to
Figure 11
.
3.
Click the drop-down arrow next to the
Adapter Name
text box and choose the
Ethernet adapter to connect to
the controller.
4.
Select the correct controller
name for the site from the list of
controllers found.
Note:
If multiple VIP-4060 controllers
are found, use the Media Access
Control (MAC) address or Dynamic
Host Configuration Protocol (DHCP)
name from the label on the back of
the VIP-4060 to select the appropriate system. The address name begins with
M4
or
DAKT
. Refer to
Figure 12
and
Figure 13
for examples.
Figure 12:
M4 Address Name
2.3 Computer System Requirements
For the best experience, the VIP-4060 requires the following:
•
Silverlight
®
2.0 application (or newer)
•
Java
®
software 1.6.0.14 (or newer)
•
JavaScript
®
enabled in the browser
For the best browser experience, the VIP-4060 requires the following:
•
Internet Explorer
®
6.0 browser (or newer)
•
Firefox
®
3.5 browser (or newer)
Figure 11:
Display Finder
Figure 13:
DAKT Address Name
