18
User Interface Basics
3.4 Using Primary & Backup VIP-4060 Systems
Displays can be configured to use primary and backup VIP-4060 systems. Both primary and backup systems
cannot be
Active
at the same time. To change which VIP-4060 system is active, follow the steps below:
1.
Log into the web interfaces of the primary VIP system and the backup VIP system.
2.
Use the primary VIP interface to locate the green
Active
switch in the
upper-right corner. Refer to
Figure 46
. Click the switch to change this
Active
VIP system to
Inactive
.
3.
Click the
Send Configuration
button to complete the switch from active
to inactive.
4.
Use the backup VIP interface to locate the gray
Inactive
switch in the
upper-right corner. Refer to
Figure 47
. Click the switch to change this
Inactive
VIP system to
Active
.
5.
Click the
Send Configuration
button to complete the switch from inactive to active.
Figure 46:
Active Switch
Figure 47:
Inactive Switch
