Installing the DoorPhone
95
➢
Installation rules
In order to ensure its weather-tightness:
➀
The technical controller must always be fitted antenna upwards.
➁
Ensure the antenna is tightened correctly.
➂
At the time of installing, always use the cable grommets.
➃
After wiring, ensure the controller’s lid is correctly fitted.
In order to ensure good radio range:
➀
Reserve a free space around the technical
controller's antenna (to a height of about
80 cm).
Clear all dense vegetation in proximity and
ensure it is maintained.
➁
Place the controller as high as possible and
ensure the antenna is clear of the mounting
surface (example: the antenna must not touch
the gate pillars cap).
➂
Limit the presence of obstacle between the
location of the controller and the house where
handsets are installed.
➃
The antenna must be completely extended.
➄
Never run a cable along side of the antenna
(notably the cable between the caller unit
and the technical controller).
Don't coil the cable close to or in the controller,
but cut the surplus.
➅
Also avoid placing the products close to metallic items (metal grilles, enclosures, metallic
gates...) or sources of electromagnetic disturbance:
- for the technical controller: electric meter, high tension electric lines, automatic gate controller,
lighting controller, radio receiver…
- for the handset: television, cordless telephone, domestic electric devices, electricity meter
or panel, computer, hi-fi, lighting controller….
➆
The technical controller must be at least 2 m from the handset location.
NB:
if it is necessary to improve the radio range, see the recommendations in the “What to do if?”
section of this guide.
80 cm
As high
as
possible
caller unit cable
caller unit cable
caller
unit
caller
unit
GB
