GB
99
Installing the DoorPhone
➢
Installing the indoor station (battery operated base)
The indoor station must be placed more than 2m away from the controller!
1
2
3
Open the base unit by
unscrewing the 4 screws
located on the underside.
Insert the four LR20
batteries and relocate
the lid using the 4 captive
screws.
4
Fit the base to the
mounting bracket.
5
For ease of use it is
recommended the indoor
station be mounted
approximately 1.5m
from the floor.
Open the battery access
flap.
Connect the battery.
Place the handset on its
cradle. It will emit 3 beeps.
The indicator
displays
to show the handset is
being charged.
6
Test the radio reception.
At a distance of more than
3m away from the controller,
press the
button.
Watch the radio reception
indicator
.
If more than 2 bars are
displayed the level is good.
(1) When the test is done
press .(2)
1,50 m
Mark the two wall bracket
mounting holes with a
6mm dia. drill.
(1) It is recommended to do this test while moving into other
rooms and going outside, to check the radio reception. If
the level of reception is insufficient please look in the “What
to do if...?.” section of this guide.
(2) 3 minutes after pressing the
, key, the handset emits
a resonant BEEP and the indicator disappears.
