GB
101
Installing the DoorPhone
➢
Functional Testing
In the case of a system with several handsets, carry out this test with each indoor station.
The testing is complete, you have successfully installed the DoorPhone!
1
2
Press the call button
.
To confirm the call, the
caller unit emits a ‘DING
DONG’ at regular intervals
for 30 sec.
The handset sounds (“DING DONG” at regular gaps
for 30 seconds or as long as communication
with the caller unit remains un-established)
and the
indicator blinks on the display.
3
4
Pick up the handset and
press the
key.
The and indicators
flash alternately to signal
that communication is
under way.
Verify communication
with the caller unit.
To end the communication, press
,
(the handset gives out a resonant BEEP to indicate
disconnection) or hang up the handset on its base,
the
indicator becomes steady again.
1
2
To change the ring type
(3 ring types available),
press the handsets
key for 5 secs.
To adjust the ring volume,
press the handsets
or keys.
The display indicates
the level set
.
NB:
it is also possible to
adjust the speech volume
level during communication
(see. User guide).
➢
Setting the type and level of ringing
