GB
103
Appendix
➢
Programming the personal access code of the external caller unit
with keypad
A 4 or 6 digit access code must be programmed to facilitate the control of the lock and gate release.
Please note: during programming, all programming errors (erroneous
access code, incorrect number press, too brief press…), are signalled
by three short BEEPs or by one warning BEEP!
Default Code
#
5
✱
9
9
9
9
✱
New personal
access code
(4 to 6 digits)
#
5
✱
✱
New personal
access code
(4 to 6 digits)
Personal access code
to change
(4 to 6 digits)
Long beep
Long beep
Personal
access
code
• Programming
• Modification
What to do in case the personal access code is lost!
During this procedure, if an auxiliary code was programmed,
the last memorized code remains but is disabled
(to re-enable it see the procedure in the user guide
for the caller unit with keypad).
!
Remove the controllers cover and press the small button inside.
You have 20 seconds in which to do the programming of the personal access
code using the 9999 code as explained above.
