GB
97
Installing the DoorPhone
➢
Installing the controller
So that it is easier to hook the base on the mounting bracket, choose a flat surface on the garden
side pillar (or make it as flat as possible), especially for the top of the part.
If necessary, use a wedge (not supplied)
To remove the fixing bracket, unscrew the locking screw situated inside the controller.
1
2
Fix the bottom
then the top
of the bracket.
Detach
the unused
washer
!
3
Attach the controllers
base to the mounting
bracket.
4
Fix the base to the bracket
with the use of the locking
screw.
5
6
Detach a cable grommet
and pierce it just to the
diameter of cable using
a crosshead screwdriver
in order to allow the
passage of the cable
of the caller unit.
Mark the 3 mounting
points and drill the pillar
with a 6mm dia. drill.
4cm
minimum
Washers
Remove the antenna
sleeve and slide it onto
the antenna from the top
towards the bottom.
Firmly screw
the antenna
onto the controllers base
and lower the antenna
sleeve as far as possible.
Cable from the external caller unit
Fix
without washer
Fix using washer
