Daikin VRV III-S RXYMQ36 48PVJU, Руководство по обслуживанию

Страница: 89 / 264

Field Setting SiUS34-907
80 Test Operation
The numbers in the "No." column represent the number of times to press the SET
(BS2) button.
Setting item 0 Display contents of “Various setting”
No. Setting item
LED display
Data display
H1P H2P H3P H4P H5P H6P H7P
0 Various setting
l h h h h h h
See below
1 C/H unified address
l h h h h h k
Lower 6 digits
2 Low noise/demand address
l h h h h k h
3 Not used
l h h h h k k
4 AIRNET address
l h h h k h h
5 Number of connected indoor units
l h h h k h k
7
Number of connected zone units
(excluding outdoor and BS unit)
l h h h k k k
8 Number of outdoor units
l h h k h h h
11
Number of zone units (excluding
outdoor and BS unit)
l h h k h k k
Lower 6 digits
12 Number of terminal blocks
l h h k k h h
Lower 4 digits: upper
13 Number of terminal blocks
l h h k k h k
Lower 4 digits: lower
14
Contents of malfunction (the
latest)
k h h k k k h
Malfunction code table
Refer to P.103.
15
Contents of malfunction
(1 cycle before)
k h h k k k k
16
Contents of malfunction
(2 cycle before)
k h k h h h h
20 Contents of retry (the latest)
k h k h k h h
21 Contents of retry (1 cycle before)
k h k h k h k
22 Contents of retry (2 cycle before)
k h k h k k h
25
Normal judgement of outdoor units
PCB
l h k k h h k
Lower 2 digits:
k h
Abnormal
h k
Normal
h h
Unjudgement
EMG operation /
backup operation
setting ON
l h h k h h h
OFF
l h h h h h h
Defrost select setting Short
l h h h k h h
Medium
l h h h l h h
Long
l h h h h h h
Te setting H
l h h h h k h
M
l h h h h l h
L
l h h h h h h
Tc setting H
l h h h h h k
M
l h h h h h l
L
l h h h h h h
c. Monitor mode
<Selection of setting item>
<Confirmation on setting contents>
To enter the monitor mode, push the
MODE (BS1) button when in
“Setting mode 1”.
Push the SET (BS2) button and set
the LED display to a setting item.
Push the RETURN (BS3) button to
display different data of set items.
Push the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
∗
Push the MODE (BS1) button and
returns to “Setting mode 1”.