Daikin VRV III-S RXYMQ36 48PVJU, Руководство по обслуживанию

Страница: 114 / 264

SiUS34-907 Troubleshooting by Remote Controller
Troubleshooting 105
Malfunction code indication by outdoor unit PCB
<Selection of setting item>
<Monitor mode>
<Confirmation of malfunction 1>
To enter the monitor mode, push the
MODE (BS1) button when in
“Setting mode 1”.
Push the SET (BS2) button and set
the LED display to a setting item.
Push the RETURN (BS3) button
once to display "First digit" of
malfunction code.
<Confirmation of malfunction 2>
Push the SET (BS2) button once to
display "Second digit" of malfunction
code.
Push the RETURN (BS3) button and
switches to the initial status of
“Monitor mode”.
∗
Push the MODE (BS1) button and
returns to “Setting mode 1”.
<Confirmation of malfunction 3>
Push the SET (BS2) button once to
display "malfunction location".
Detail
description
on next
page.
<Confirmation of malfunction 4>
Push the SET (BS2) button once to
display "master or slave 1 or slave 2"
and "malfunction location".
Contents of malfunction
Malfunction
code
In-phase malfunction of DIII-NET Detection of DIII-NET E1
Abnormal discharge pressure High pressure switch activated
E3
Abnormal suction pressure Abnormal Pe E4
Compressor lock Detection of INV. compressor lock E5
Over load, overcurrent,
abnormal lock of outdoor unit fan Detection of DC fan 1 motor lock E7
Detection of DC fan 2 motor lock
Malfunction of electronic
expansion valve EV1 E9
EV3
Faulty sensor of outdoor air
temperature Faulty Ta sensor (short) H9
Abnormal discharge pipe Abnormal Td F3
Abnormal heat exchanger Refrigerant overcharge F6
Faulty sensor of discharge pipe
temperature Faulty Tdi sensor (short) J3
Faulty sensor of suction pipe
temperature Faulty Ts1 sensor (short) J5
Faulty Ts2 sensor (short)
Faulty sensor of heat exchanger
temperature Faulty Tb sensor (short) J6
Malfunction of the liquid pipe
temperature sensor Faulty TI sensor (short) J7
Faulty sensor of subcooling heat
exchanger temperature Faulty Tsh sensor (short) J9
Faulty sensor of discharge Faulty Pc sensor (short) JA
Faulty sensor of suction pressure Faulty Pe sensor (short) JC
Faulty Inverter PCB Faulty IPM L1
Abnormal current sensor offset
Abnormal IGBT
Faulty current sensor
Abnormal SP-PAM overvoltage
Inverter radiation fin temperature
rising Over heating of inverter radiation
fin temperature L4
DC output overcurrent Inverter instantaneous L5
Electronic thermal Electronic thermal switch 1 L8
Electronic thermal switch 2
Out-of-step
Speed down after startup
Lightening detection
Stall prevention (Limit time) Stall prevention (Current
L9
Stall prevention (Faulty start up)
Abnormal wave form in startup
Out-of-step