Daikin Super Multi NX C-Series Скачать руководство пользователя страница 269

Страница: 269 / 298

Others

SiE12-411

258

Others

1.2.3 Adjusting the Angle of the Intelligent Eye Sensor

Wall Mounted Type 25 / 35 Class Only

Once installation of the indoor unit is complete, adjust the angle of the Intelligent eye sensor

to ensure the detection area properly covers the room.
(Adjustable angle : 15° to right and left of center)

Gently push and slide the sensor to adjust the angle. Aim so that the sensor is pointing to the

center of the room, or to the part of the room that is most frequently used.

After adjusting the angle, gently wipe the sensor with a clean cloth, being careful not to

scratch the sensor.

Caution

Do not hit or violently push the Intelligent eye sensor. This can lead to damage and

malfunction.

Do not place large objects near the sensor. Also keep heating units or humidifiers outside

the sensor’s detection area.

Intelligent-eye

15°

Moving the

or to the left

Moving the

or to the right

Содержание Super Multi NX C-Series











































































































































































































































































































Результаты поиска

Содержание Super Multi NX C-Series

Отзывы:

Daikin Super Multi NX C-Series, Руководство по обслуживанию, Страница: 269 / 298

Результаты поиска

Содержание Super Multi NX C-Series

Отзывы: