Daikin Super Multi NX C-Series, Руководство по обслуживанию, Страница: 268 / 298

SiE12-411 Others
Others 257
1.2 Jumper Settings
1.2.1 When Two Units are Installed in One Room
"
How to set the different addresses.
"
When two indoor units are installed in one room, the two wireless remote controllers can be
set for different addresses.
PCB in the indoor unit
"
Remove the front panel.
"
Remove the sensor parts cover (2-screws), then remove the electric parts box (1-screw).
"
Slide the metallic cover to remove it. (4-claws on the electric parts box.)
"
Cut the jumper JA on PCB.
Wireless remote controller (in case of wall mounted type)
"
Cut the jumper J4.
1.2.2 Jumper Setting
Addre ss J4
CUT
EXI S T 1
2
ADDRE SS
J4
CUT
EXI S T 1
2
JA
JB
JC
Met a llic cover
PCB
Cl a w s (4 point s )
(R25 8 7)
Infr a red
remote
control
ADDRE SS : JA
Electric
p
a rt s b ox
S en s or
p a rt s cover
Jumper
(On indoor PCB)
Function When connected
(factory set)
When cut
JC Power failure
recovery function Auto start Unit does not resume operation
after recovering from a power
failure. Timer ON-OFF settings
are cleared.
JB Fan speed setting
when compressor is
OFF on thermostat. Fan speed setting ;
Remote controller
setting Fan rpm is set to “0”
<Fan stop>