Daikin Super Multi NX C-Series, Руководство по обслуживанию, Страница: 155 / 298

Instruction SiE12-411
144 System Configuration
ATTENTION
"
To use ON TIMER operation
• Check that the clock is correct. If not, set the
clock to the present time.
1. Press “ON TIMER button”.
7:00
is displayed.
blinks.
2. Press “TIMER Setting button” until the time
setting reaches the point you like.
•
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “ON TIMER button” again.
• The TIMER lamp lights up.
"
To cancel ON TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
"
To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is
shown below.
ON
OFF
C
TEMP
ON/OFF
POWERFUL
HOME LEAVE
MODE
TIMER
FAN S WING
S ILENT S EN S OR
ON CANCEL
OFF
2
1. 3
4
Di
s
pl
a
y
(Ex a mple)
Com b ined
Pre s ent time: 11:00 PM
(The u nit oper a ting)
OFF TIMER a t 0:00 a .m.
ON TIMER a t 7:00 a .m.
"
In the following cases, set the timer again.
•
After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote control.