- 3 -
Outline of the Manual
1. Firstly, read carefully the section of
“
Introduction
”
. Then, confirm the contents of the
packaged items by following the procedures of
“
Confirming of packaged items
”
. Then,
prepare for a personal computer.
2. Install the checker TYPE 3 software(English) into the personal computer by following the
procedures of
“
Chapter 1 Installing of TYPE 3 software
”
. Perform this installing at the time
of purchasing the Service Checker TYPE 3.1 and every version-up of the TYPE 3 software.
Refer to the
“
1.2 Deleting of TYPE 3 software
”
when the TYPE 3 software needs to be deleted
from the computer.
3. Refer to the
“
Chapter 2 Connection to air-conditioner
”
on the connecting between an
air-conditioner and the Service Checker TYPE 3.1 and the personal computer.
4. Refer to the
“
Chapter 3 Starting- up and ending of TYPE 3 software
”
on the starting- up and
ending of the TYPE 3 software and the setting of customer data and others.
5. After connecting the Service Checker TYPE 3.1 to the air-conditioner and the personal
computer, operation data and network map(linking between an indoor unit and an outdoor unit)
can be displayed by following the procedures of the
“
Chapter 4 Recording of operation data
”
.
Also, following the procedures of the
“
4.2 Setting of recording
”
, it is possible to record data
after setting to record them into the hard disc of the personal computer.
6.
When recording, operation data and network map are recorded, while in playing back, the
operation data and network map are played back by following the procedures of the
“
5.1
Playing back of operation data
”
and the
“
5.2 Playing of network map
”
respectively.
Over view of service checker TYPE3
