- 22 -
Chapter 4 Recording of operation data
(5) This is the window of the [Access Method Selection].
(a) Be sure to input the [1. Network map name].
(b) Select the [2. Access method].
・
[DIII-NET]
: Possible to use only DIII-NET connection or in
combination with Sensor input. Possible to use air
conditioners conforming to the DIII-NET in internal and
external transmission method. Possible to identify
and select automatically the type of an air conditioner,
so, selection is not necessary.
・
[PCB connection] : do not use.
・
[Sensor input only] : Select this when monitoring the temperature and
pressure of an air conditioner in not conformity with
DIII-NET connection by an optional sensor kit.
(c) If the selection is OK, press the [O.K.(F1)]. Proceed to the window of the
[Network Map Display]. (Refer to
“
4.1.2 Network map display.
”
) When
returning to the previous stage, press the [Cancel(ESC)].
