- 28 -
Chapter 4 Recording of operation data
(4) By selecting another air conditioner with the [1.Airconditioner selection] to input
necessary data, press the [Save(F1)].
(Notes)
* In case of replacing PCB of an air conditioner, auto addresses in the network are
changed.
* If in the DIII-NET connection, a PCB of an air conditioner is replaced after making a
network map once, the detail data for air conditioners will be deviated by reason of
managing the detail data for each air conditioner in order of auto address. To
correct the deviation, move the detail data in accordance with the following
procedures. (Auto address and Airnet address are not related to since they are
automatically identified.)
* To correct the deviation, move the detail data in accordance with the following
procedures.(an example of transfer the detail data of [In3] to [In7])
[1] Select the [In7] by the[1.Airconditioner selection] in the window of the [Detail
data input].
[2] Press the [List display(F2)] to display the window of [Detail Data List Display].
[3] By placing the cursor at the transferring [In3] and pressing the [Copy(F1)] button,
the detail data of the [In3] are transferred to the [In7].
[4] Press the [Cancel(ESC)] to return to the window of the [Detail data input].
(5) After completing to input, press the [Cancel(ESC)] to return to the window of the
[Network map display].
