- 35 -
Chapter 4 Recording of operation data
4.2.2 Setting of periodical recording (in case of sensor
input only)
The window of the [Periodical record setting] is displayed by pressing the button of
the [Periodical record setting(F6)] after selecting the [Recording mode(F5)] in the
window of the [Network Map Display].
The window of the
[Periodical record setting]
Procedures
(1) Set the [1. Recording interval] and the [2. Recording end method].
Refer to (1) of the
“
4.2.1 Setting of periodical recording(in case of DIII-NET
connection and PCB connection). (There is no setting of the [3. Recording
system selection]
(2) Set the [4. Setting of sensor input]
Refer to (2) of the
“
4.2.1 Setting of periodical recording (in case of DIII-NET
connection and PCB connection).
(3) When completing to set the above, press the [Setting complete(F1)] to return to
the window of the [Network Map Display].
(4) When starting the periodical recording, press the [Periodical record start(F7)] in
the window of the [Network Map Display] to display the [Periodical recording] in
red at the upper left in the window. Also the indication of the button is changed
to the [Periodical record end(F7)].
