Daikin RoCon+ HP Series, Руководство по эксплуатации

Страница: 30 / 516

7 Parameter settings
Operating Instructions
30
Daikin RoCon+ HP
Daikin controller RoCon+ HP1
008.1447899_00 – 09/2019 – EN
7.3 User
[→ Main menu → User]
7.3.1 Menu: Room temperature target
[→ Main menu → User → Room]
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
Room temper-
ature target 1 5 – 40 °C Target value of the room temperature in °C, which is valid for the 1st
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 20 °C 0.5 °C E E
Room temper-
ature target 2 5 – 40 °C Target value of the room temperature in °C, which is valid for the 2nd
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 20 °C 0.5 °C E E
Room temper-
ature target 3 5 – 40 °C Target value of the room temperature in °C, which is valid for the 3rd
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 20 °C 0.5 °C E E
Tab. 7-2 Parameter in the "Room temperature target" menu
7.3.2 Menu: Reduce room temperature
[→ Main menu → User → Reduce]
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
Reduce room
temperature 5 – 40 °C Target value of the reduced room temperature in °C, which is valid for the
[Automatic 1] and [Automatic 2] time programs. 15 °C 0.5 °C E E
Tab. 7-3 Parameter in the "Reduce room temperature" menu
7.3.3 Menu: Room temperature absent
[→ Main menu → User → Absent]
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
Room temper-
ature absent 5 – 40 °C Target value of the reduced room temperature in °C, which is valid for the
[Absent] + [Holiday] time programs. 15 °C 0.5 °C E E
Tab. 7-4 Parameter in the "Room temperature absent" menu
7.3.4 Menu: Hot water temperature, target
[→ Main menu → User → Hot water]
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
Hot water tem-
perature target
1 35 – 70 °C Target value of the hot water temperature in °C, which is valid for the 1st
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 48 °C 0.5 °C E E
Hot water tem-
perature target
2 35 – 70 °C Target value of the hot water temperature in °C, which is valid for the 2nd
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 48 °C 0.5 °C E E
Hot water tem-
perature target
3 35 – 70 °C Target value of the hot water temperature in °C, which is valid for the 3rd
switching time cycle of the [Automatic 1] and [Automatic 2] time programs. 48 °C 0.5 °C E E
Tab. 7-5 Parameter in the "Hot water temperature, target" menu
7.3.5 Menu: 1 x hot water
[→ Main menu → User → 1x load]
Parameters Setting range
Min / Max
Description Factory
setting
Incre-
ment
Access
BE HF
1 x hot water Off Start of one-time domestic hot water preparation to the set target value
[Hot water temperature target 1] without time limit, independent of the heat-
ing programs. - E E
On
Tab. 7-6 Parameter in the "1 x hot water" menu