PIM00587
EN-100
CHAPTER 13
APPENDIX
The start/stop signals (digital input 1) in the timing charts all assume that the value set for [P00: Start/stop
signal switching] is “1” (default value).
When the value set for [P00:
Start/stop signal switching] is “0”, the ON and OFF statuses of the start/stop
signal (digital input 0) are inverted.
13.1
Timing Chart at Powering Up
The timing chart at powering up differs depending on the alarm output mix as shown below.
◼
The setting
value of “P08 : Alarm output mix” is “0” or ”
2
”
◼
The setting
value of “P08 : Alarm output mix” is “
1
”
OFF
ON
OFF
ON
Power supply, 3-phase
Digital
input
Digital
output
OFF
Approx.
0.02s
Unit operation
Display
OFF
ON
OFF
ON
OFF
Approx. 0.2s
DIN0
(start/stop signal)
DO2
Command possible
Command impossible
Command impossible
Max. 3s
Waiting
to run
Charging
Actual pressure
Normal
running
Stop
Waiting
to run
Normal
running
Actual
pressure
Magnetic pole
detection
OFF
ON
OFF
ON
Power supply, 3-phase
Digital
input
Digital
output
OFF
Unit operation
Display
OFF
ON
OFF
ON
OFF
Approx. 0.2s
DIN1
(start/stop signal)
AL_A
(Integrated output)
Command possible
Command impossible
Command impossible
Max. 3s
Waiting
to run
Charging
Actual pressure
Normal
running
Stop
Waiting
to run
Normal
running
Actual
pressure
Magnetic pole
detection
Approx.
0.02s
