CAUTION
Wear protective glasses and gloves for this work.
Do not touch the controller board directly. Otherwise, it could be damaged by static
electricity.
Carry out withstand voltage tests at DC2 kV or lower. Applying voltages higher than
this may damage this product.
Do not perform Megger testing on control circuits. This could damage the product.
1.6.4
59B
CAUTION
When disposing of this product, entrust it to a specialist contractor as general industrial waste.
1.6.5
60B
WARNING
The warning plates are very important, so do not damage or remove them.
If a warning plate becomes difficult to read through peeling or losses, contact Daikin
immediately.
This is a warning plate that indicates
a high voltage hazard.
This is a caution plate for high
temperatures.