PQ selection parameters
1.
Hold down the
and
keys together in the regular mode. After about 2 seconds, the mode
will switch to the setting mode.
2.
Select P13 with the
or
key. During data number selection, the display will flash.
3.
Confirm the data number by pressing the
key. The value for the selected data number will be
displayed.
4.
The set values for pressure and flow rate in the PQ selection parameters will be displayed
alternately at approximately 2-second intervals.
5.
Change the set values by incrementing or decrementing them with the
and
keys.
The data code will be displayed approximately 2 seconds after a set value has been changed.
6.
Press the
key. The set value will be confirmed and the next data code will be displayed.
7.
Repeat steps 4, 5 and 6.
8.
Press the
key. The display switches to the data number selection screen. Parameters whose
values have been changed up until that time will retain the changed values.
9.
Relationship between data display and parameters
Display Order
Display *1
Parameter Name
1
Pressure setting
2
Flow rate setting
When changing the working pressure, the rotation speed also changes.
Adjust according to EN-60
Minimum Rotational Speed Adjustment Instructions .
or
Elapse of 2 seconds
Elapse of 2 seconds
Data selection and value display/editing
or
Elapse of 2 seconds
Elapse of 2 seconds
Elapse of 2 seconds
Holding down together (approx. 2 seconds)
Regular mode
Setting mode
1.
2.
3.
4.
5.
6.
7.
8.
9.
Selection of data number
Elapse of 2 seconds
