10.5
39B
Setting Mode
10.5.1
71B
1.
Hold down the
and
keys together in the regular mode.
After about 2 seconds, the mode will switch to the setting mode.
2.
Select the data number to be displayed by using the
key or
key. During data number
selection, the display will flash.
3.
Confirm the data number by pressing the
key. The value for the selected data number
will be displayed.
4.
Change the set value by incrementing or decrementing it with the
and
keys.
5.
Confirm the set value with the
key. This returns you to data number selection.
Selection of data number
Value display
Value editing
Regular mode
Holding down together (approx. 2 seconds)
Confirmation
Setting mode
1.
2.
3.
4.
5.
The data number selected after the
maximum data number returns to P00.
..
.
