CHAPTER 12
11B
APPENDIX
The start/stop signals (digital input 0) in the timing charts all assume that the value set for [P00: Start/stop
signal (digital input 0) are inverted.
12.1
52B
Timing Chart at Powering Up
The timing chart at powering up differs depending on the type of power supply as shown below.
When sharing control power supply
Judge the charging completed/not completed status based on the alarm output or DOUT (READY
output).
An alarm output before charging or after stopping indicates an abnormal status.
Common power supply source to control and main circuit
12.2
53B
Parameter List
Panel
Indication
Code
Name
Operation Range
Default
Value
Details
P00
DI_A
Start/stop
signal
switching
0: Runs at DIN0-ON
1: Runs at DIN0-OFF
1
DIN0: Sets the effective logic for the start/stop
signal.
P01
SW_L
Pressure
switch
0 - 35.0 [MPa]
0
Sets the actuation value of the pressure
function is disabled.
0 to 507 [×10PSI]
0
Command possible
OFF
Waiting
to run
Charging
ON
OFF
ON
Power supply, 3-phase
Digital
input
DIN0
(start/stop signal)
Digital
output
DOUT
(READY output)
OFF
Approx. 20 seconds
Contact
output
ALM_a
Unit operation
Display
Normal
running
Actual
pressure
Command impossible
Actual
pressure
Normal
running
OFF
ON
OFF
ON
OFF
Stop
Max. 3 seconds
