Safety information
General information
2
General information
Safety information
Power connection regulations
Please note the connection conditions specified by your
local electrical power supply company and the VDE regula-
tions.
Your heating control system may only be installed and ser-
viced by appropriately authorised specialists.
E
For fixed devices, a facility for mains disconnection in
accordance with EN 60335 must be installed in compliance
with the installation specifications (e.g. switch).
E
The mains lines insulation must be protected against damage
caused by overheating (e.g. insulation hose).
E
The minimum distance to installation objects in the vicinity
must be chosen so that the permitted ambient temperature is
not exceed during operation (see table - Technical Data).
E
If the system is not installed properly, persons using it are at
put at risk of fatal or serious injury (electric shock).
Ensure the controller is de-energized prior to performing any
work on the controller!
Safety
Please read and keep in a safe place
Please read through these instructions care-
fully before installing or operating. Following the installa-
tion, pass the instructions on to the operator.
Warranty conditions
If the system is not installed, commissioned, serviced and
repaired properly, it will render the manufacturer's warranty
null and void.
Conversion
All technical changes are prohibited.
Transport
On receipt of the product, check that the delivery is com-
plete. Report any transport damage immediately.
Storage
Store the product in a dry place. Ambient temperature: see
Technical data.
Important text passages
!
Important information is highlighted by an
exclamation mark.
E
This attention symbol indicates dangerous situations.
Note
!
The operating manual describes the maximum
version of the controller, meaning that not all
statements are relevant for your device.
