Daikin Clima-Flex CLIC Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 80 / 118

iom-clic-cf-eng www.clima-flex.com
80
Chiller Parameters Configuration
This table shows all the parameters that can be configured according to application.
LABEL DESCRIPTION MIN MAX VALUE/TYPE UNIT RW ADU
StU General > Setup
y01 ON/OFF 0 1 0 - OFF Enum 1 RW 3001
y03 System heat/cool 0 1 0 - COOL Enum 2 RW 3002
UT Unit Type 0 1 0 - MOTHER Enum 25 RW 3003
y05 Metric / Imperial Units 0 1 0 - METRICS Enum 24 RW 3004
y07 Restore default parameters 0 1 0 - NO Enum 3 RW 3005
ALA General > Configuration
BUZZ Buzzer activation time 0 15 1 min RW 3006
AdL Alarm relay activation delay 0 999 0 s RW 3007
AOF Alarm relay active if unit in OFF 0 1 1 - YES Enum 3 RW 3008
SEr General > Serial settings
SEr Serial address (Modbus and CAN) 1 100 1 RW 3009
bAU Serial baudrate (Modbus) 0 8 8 - 384 Enum 4 RW 3010
COM Serial settings (Modbus) 0 2 1 - 8E1 Enum 5 RW 3011
CFG Parameters > Unit config
H11 Fans in common to all condensers 0 1 0 - NO Enum 3 RW 3017
H40 Heat Pump Type 0 2 0 - NO Enum 6 RW 3018
TEM Parameters > Temperature control
REG Regulation Probe 0 1 1 - TOUT Enum 7 RW 3019
RET Regulation Type 0 1 1 - PI Enum 8 RW 3020
STC Temperature Setpoint in Cooling 0.0 100.0 6.6 °C RW 3021
DFC Temperature Differential in Cooling 0.0 100.0 4.0 °C RW 3022
STH Temperature Setpoint in Heating 0.0 100.0 40.0 °C RW 3023
DFH Temperature Differential in Heating 0.0 100.0 4.0 °C RW 3024
SSC Second Setpoint Offset in Cooling -10.0 10.0 1.0 °C RW 3025
SSH Second Setpoint Offset in Heating -10.0 10.0 -1.0 °C RW 3026
INT Temperature Integral Time 0 600 120 s RW 3027
MA1 Enable Manual Demand 0 1 0 - NO Enum 3 RW 3028
MA2 Manual Demand Value 0.0 100.0 66.0 % RW 3029