Daikin Clima-Flex CLIC Series Скачать руководство пользователя страница 106

Страница: 106 / 118

iom-clic-cf-eng

www.clima-flex.com

106

CONTROL PANEL

The following instructions apply to the graphical LCP (LCP 102):

The control panel is divided into four functional groups:

1. Graphical display with status lines. All data is displayed on

a graphical LCP display, which can show up to five items of

operating data while displaying the [Status].

2. Menu keys and indicator lights - change parameters and

switch between display functions.

3. Navigation keys and indicator lights (LEDs).

4. Operation keys and indicator lights (LEDs).

Vdf Compressor Controller

Figure 69. LCP Overview

DISPLAY LINES

A. Status line:

Status messages showing icons and graphic.

B. Line 1-2:

Operator data lines showing user-defined or

user-selected data. By pressing the [Status] key, up to one

additional line can be added.

C. Status line:

Status messages displaying text.

ADJUSTING THE DISPLAY CONTRAST

Press [Status] and [ ▼ ] to make the display darker.

Press [Status] and [ ▲ ] to make the display brighter.

INDICATOR LIGHTS

If certain threshold values are exceeded, the alarm LED lights up

and/or the alarm LED lights up. An alarm status and alarm text are

displayed on the control panel.

The control panel. The power LED is activated when the frequency

inverter is supplied with mains voltage.

• Green LED/on: The control section is running.

• Yellow LED/Warning: Indicates a warning.

• Red LED flashing/Alarm: Indicates an alarm.

Figure 70. Indicator lights

LCP KEYS

The control keys are divided into functions. The keys below the

display and the indicator lights are used for parameter settings,

including the choice of display indication during normal operation.

Figure 71. Function keys

The [Status] indicates the status of the frequency converter and/

or compressor motor.

Choose between 3 different readouts by pressing the [Status] key:

5-line readout, 4-line readout or Smart Logic Control by pressing

[Status] twice.

Press [Status] to select the display mode or to return to the display

mode from the quick menu mode, main menu mode or alarm

mode. Also press [Status] to toggle single or dual readout mode.

Status

1234rpm

10,4A

1(0)

43,5Hz

Run OK

Status

Quick

Main

Alarm

Log

Warn.

Alarm

Hand

Off

Auto

Reset

Inf

Log

Alarm

Warn

Alarm

The [Quick Menu] allows quick access to different quick menus

such as:

• Q1 - My personal menu

• Q2 - Quick Setup

• Q3 - PID Process Loop

• Q4 - Compressor functions

• Q5 - Changes made

• Q6 - Records

• Q7 - Load profile

Содержание Clima-Flex CLIC Series























































































































Результаты поиска

Содержание Clima-Flex CLIC Series

Отзывы:

Похожие инструкции для Clima-Flex CLIC Series

Бренды по названию

Популярные бренды

Daikin Clima-Flex CLIC Series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание Clima-Flex CLIC Series

Отзывы:

Похожие инструкции для Clima-Flex CLIC Series

Бренды по названию

Популярные бренды