Daihatsu MD-SX, Инструкция по эксплуатации

Страница: 6 / 57

3

16 sensors can be installed for one engine at the maximum.

16 sensors can be installed in total at the maximum for two engines, 8 sensors each for an engine.
*

Wire the sensors in daisy chain system (connection-in-a-row system) for each engine.

Limit the total length of the telecommunication cable from the sensor of an end to a controller is less than
150 m (for use of Daihatsu option cables). In case of the total wire length exceed 150 m, please ask the wiring
method to Daihatsu.

The wiring between sensors and controller shall be used Daihatsu option cables (the cable with connectors).

(Note: When installing a junction box between a controller and sensors, a general cable for ships can be used
between the controller and the junction box.)

Mount the sensor directly on the engine frame.

Use the specified rubber cushions to isolate the controller from vibration if it is directly mounted on the
engine body.

Before using the mounting method described above, please contact us.

For ship use, it may be limited by the shipping classification society with one oil mist detector system 1
formula per engine. Please follow the rule of each shipping classification society.

For sensor wiring method, The loop wiring also applicable other than daisy chain method
（
Please refer to 16.4 Attention of using LOOP wiring for sensor cable routing
）
Original content from www.daihatsu.cc
Issued to HORIZON TANKERS LIMITED S.A.