DAIHAN-Sci.com or
ALL forLAB.com
Shopping Mall
DAIHAN Scientific, Rotary Vacuum Evaporator
20/31
3) Set a proper height with the use of Jog-Dial knob and then push long Jog-Dial knob. The set
value flickers and the height is saved. In this case, the height is not set to the one lower than
the value set in Height Pre-limit Mode. If you want to set a height lower than the set value,
change the mode to ‘FREE’ to set the value again.
4) After the setting is complete, push the mode button once. Now, you can escape from Save
Height Mode.
④
Lift Height Control
1) It is possible to adjust Lift’s height
with the use of UP & DOWN buttons on the bottom.
2) Push long Lock button. The button’s red light is on.
Now, Height Lock mode is set up.
In this mode, the current height is fixed.
Arrow UP & DOWN buttons do not work.
3) Push long Lock button again. The button’s Red light is off. Height Lock mode is released.
⑤
Rotary Speed Setting
1) In Set Lift Height Limit Mode, push the mode button once. It is possible to go to Set Rotary
Speed Mode.
2) If the arrow on the left bottom of LCD flickers, turn Jog-Dial knob to set a rotation direction.
means clockwise turn, and means counterclockwise turn.
3) After rotation direction is set up, push the mode button to set a RPM value.
If a SV(Set Value) value on the bottom of LCD flickers, turn Jog-Dial knob to set a RPM
value.
It is possible to set it up to 300RPM.
4) After the setting is complete, push Jog-Dial knob once. The flask starts to rotate and
Icon is displayed on LCD. The current RPM value is displayed on the top `PV(Present
Value)’.
5) If Jog-Dial knob is pushed once in rotation, the rotation process stops.
285
RPM
RPM
300
PV
SV
Set RPM
Current RPM
Rotation status
display
Rotation
direction
