DAIHAN-Sci.com or
ALL forLAB.com
Shopping Mall
DAIHAN Scientific, Rotary Vacuum Evaporator
23/31
4) Turn Jog-Dial knob left or right in setting standby state. SV(Set Value) on the bottom of LCD
is changed.
5) Set up a proper time and then push Jog-Dial knob once. PV stops flickering and timer starts
to work.
6) Timer can be set up in the range of 00:00~99:59 in the unit of one minute. If timer is set to
"00:00", Heating goes on.
7) When timer ends, a buzzer sound rings and Heating stops.
8) If Mode button is pushed in Set Timer Mode, it is possible to change to Set Temperature
Mode. If MODE button keeps being pushed and then Jog-Dial Knob is pushed, it is possible to
change to Set Delay Time Mode.
* Set Delay Time
1) If Mode button keeps being pushed and then Jog-Dial Knob is pushed once in Set Operation
Time Mode, it is possible to change to Set Delay Time Mode.
2)
Delay Timer
function is used to set up a reservation time and execute heating operation after
the time.
3) The proper use of Delay Timer is to set up a reservation time first and then set up a
temperature in order to run at the set temperature automatically after the reservation time.
Fig 3.5.1. Timer Setting Screen
PV
: 0
: 10
SV
Set up timer
Remaining
Err 1
: 10
SV
d-tr
: 10
SV
42.5
: 10
SV
PV
℃
Flicker
Fig 3.5.2. Set Delay Time Mode Screen
Fig 3.5.3. Delay Timer Operation Screen
Delay Time
Remaining
time
