DAIHAN-Sci.com or
ALL forLAB.com
Shopping Mall
DAIHAN Scientific, Rotary Vacuum Evaporator
24/31
4) When “d-tr” flickers in Display, set up a reservation time with the use of Jog-Dial Knob. Push
Knob. The time value is fixed in “d-tr” Display. Now, the reservation timer runs.
5) After setting up the reservation timer, push MODE Button to change to Set Operation Time
Mode. In Set Operation Time Mode, set up an operation time and click Start.
Push Mode button again to set up a temperature and Click Start.
If reservation timer is set up and then Start button is clicked, operation is made with a set value
after the reservation time.
6) If setting is made as described above, heating starts after a user’s reservation time. If Delay
Timer runs, icon flickers.
7) In Heating/Timer operation, Delay Timer is unable to be set up. Therefore, stop running and
then set up Delay Timer.
②
Set Temperature Mode
1) If Mode button is pushed once in Set Timer Mode, it is possible to go to
Set Temperature
Mode
.
2) In Set Temperature Mode, turn Jog-Dial knob to set up a proper temperature. When Jog-Dial
knob is pushed once, heating starts.
3) While Heater runs and a temperature goes up, icon is turned on. If a set temperature is
equal to the current temperature, Heater keeps the temperature.
3) An available temperature ranges from A5
℃
to 200.0
℃
. It can be adjusted in the unit
of 0.1
℃
.
4) If Mode button is pushed in the current mode, it is possible to change to Locking Mode. If
Mode button keeps being pushed and then Jog-Dial Knob is pushed, it is possible to change
to Set Temp Offset Mode.
* Set Temp Offset
-
If Mode button keeps being pushed and then Jog-Dial Knob is pushed once in Set Temperature
Mode, it is possible to change to Set Temp Offset Mode.
PV
26.8
50.2
SV
℃
℃
Fig 3.5.4. Set Temperature Mode Screen
Set Temp.
Current Temp.