Web Operation 84
Manual add
Figure 4-67
Configure the parameters. See Table 4-18 for details.
Step 2
Table 4-18 Manual add parameters description
Parameter
Description
Device Name
It is to enter device name.
Manufacturer
Select device manufacturer.
Protocol
It is TCP by default.
IP Address
Configure the IP address of device to be added.
Port
Configure port number of device to be added. The port number is
37777 by default.
Username
Configure the username to log in the device to be added.
Password
Configure the password to log in the device to be added.
Channel No.
Number of connected channels.
Click
OK
.
Step 3
This network signal is displayed in the list, and the system displays
Saved
successfully
.
Import and Export Config
Import and export configurations to add network signals in batches.
Enable HTTPS before using
Import Config
and
Export Config
functions. See "4.5.2.2 Port."
Import or export configurations.
Step 1
Click
Import Config
, to import the preset devices information into the system.
Click
Export Config
, to export configuration file and save it in local device for
backup.