Web Operation 77
Parameter
Description
Mode
Static
Manually enter the IP address, subnet mask and gateway.
DHCP
Select the
DHCP
box, the system automatically obtains an IP
address. When the
DHCP
function is enabled, the IP address,
subnet mask and default gateway cannot be set manually.
If DHCP is effective, the obtained information will be displayed
in the
IP Address
box,
Subnet Mask
box and
Default
Gateway
box. If DHCP is not effective, they all display 0.
To view manually set IP when DHCP is not effective, you shall
disable DHCP first, and then the device will display IP info
that is not obtained through DHCP. If DHCP is effective, if
DHCP is disabled, static IP information will restore default
settings. You need to configure IP again.
IP Address
Enter numbers to change the IP address, and then configure its
Subnet Mask
and
Default
Gateway
.
IP address and default gateway must be in the same network segment.
Subnet Mask
Default Gateway
Click
OK
to complete modification of Ethernet card information.
Step 4
Click
OK
.
Step 5
4.5.2.2 Port
Set max connection and port number to visit video matrix platform through client (including web
client and PC client).
Select
Setup > Network > Port > Connection Setup
.
Step 1
The
Connection Setup
interface is displayed. See Figure 4-57.
Connection setup
Figure 4-57
Configure max connection and port number. See Table 4-15.
Step 2
Table 4-15 Port parameters description
Parameter
Description