Dahua M60, Руководство пользователя, Страница: 67 / 130

Web Operation 61
PTZ Control Figure 4-37
Table 4-7 PTZ parameters description
Parameter Description
Scan
Click Setup , turn the camera with direction buttons, and click Set Left

Border and Set Right Border to set left and right borders of PTZ scan.
Click Start , and PTZ starts to scan. Click Stop , and PTZ stops

scanning.
Preset
Click Add to add a preset point. 
In the input box, enter the preset value, and then click View ; the

camera moves to the location of preset point.
Point Tour
In the input box, enter tour path, and click Start to start tour. Click Stop 
to stop tour.
Enter preset point number, and then click Add to add this preset point

after the last preset point of this tour path.
Pattern
Enter the pattern value, and then click Start to start pattern. Click Stop

to stop the pattern.
Click Add , and you can configure a new pattern path with Start 
Record and Stop Record .
Pan
Click Start , and PTZ starts to pan. Click Stop , and PTZ stops panning.
Lamp Wiper
Click Enable to enable the lamp and wiper, and click Disable to disable the
lamp and wiper.