Web Operation 103
Display setup
Figure 4-98
Configure the parameters. See Table 4-25 for details.
Step 2
Table 4-25 Parameter description
Parameter
Description
Slot
Configure slot of display.
Channel
Configure the channel of display.
Resolution
Configure the resolution of display. Customize the resolution after you
select
Customized
.
Display
Configure output mode of the display, including
Force
and
Hot Swap
.
Hot swap: Images are output only when output port of the device is
connected with the display.
Force: Images are output even when output port of the device is not
connected with the display.
Audio Mode
Configure audio output mode, including Out to SubCard, Out to MainCard,
and Both.
Out to SubCard: Decoding sound is output from audio output port of
sub-card.
Out to MainCard: Decoding sound is output from audio output port of
main card.
Both: Decoding sound is output from audio output port of sub-card
and main card at the same time.
Video Mode
Video output mode includes DVI and HDMI.
Hue
Drag the slider to adjust the image hue and saturation.
Brightness
Drag the slider to adjust the image brightness through linear adjustment.
The bigger the value is, the brighter the image will become. And vice
versa. However, the image is likely to become dim if the value is too big.