Dahua M60, Руководство пользователя, Страница: 84 / 130

Web Operation 78
Parameter Description
Max
Connection
The allowable maximum number of clients accessing the Device at the
same time, such as web, platform, and mobile phone. The default value is
128.
TCP Port
TCP service port. The default setting is 37777. You can configure this
parameter according to your actual situation.
UDP Port
User Datagram Protocol port. The default value setting is 37778. You can
enter the value according to your actual situation.
HTTP Port
Hyper Text Transfer Protocol port. The default setting is 80. You can enter
the value according to your actual situation, and in this case, please add
the modified port number after the address when you log in the Device on
the browser.
RTSP Port
Select the check box to enable RTSP.
 RTSP port number is 554 by default. The following formats can be
used to play when using QuickTime or VLC in Apple browser to play
real-time monitoring. Blackberry also supports this feature.
 URL format of real-time monitoring stream. When requesting RTSP
streaming media service of real-time monitoring stream, the URL
should be specified in the request channel number, stream type, as
well as user name and password if you need authentication
information.

To use BlackBerry to access, stream encoding mode is set to H.264B,
resolution is set to CIF, and the audio shall be turned off.
URL format is described as below:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&su
btype=0
Username: username, for example admin. 
Password: password, for example admin.

IP: device IP, for example 10.7.8.122. 
Port: port number. Default port is 554. It is unnecessary to enter if it is

default.
Channel: channel number, starting from 1. In case of channel 2, 
channel=2.
Subtype: stream type. Main stream is 0 (subtype=0), sub stream is 1 
(subtype=1).
For example, request sub stream of channel 2 of the device. URL is as
below:
rtsp://admin:admin@10.12.4.84:554/cam/realmonitor?channel=2&su
btype=1
If it doesn’t need
authentication, username and password don’t need to be
set. Use the following format:
rtsp://ip:port/cam/realmonitor?channel=1&subtype=0
Click OK . Step 3
Except Max Connection , modifications of other parameters will take effect after reboot.