Web Operation 37
4
Web Operation
Network Connection
4.1
Connect the video matrix platform and the PC with network.
Step 1
Set the IP address, subnet mask and gateway of PC and video matrix platform
Step 2
respectively. For network setup of video matrix platform, refer to
Step 3
If there is no router in the network, distribute IP address in the same network
segment.
If there is a router in the network, configure the corresponding gateway and subnet
mask.
Ping ***.***.***.***(IP address of video matrix platform) to check whether connection is
Step 4
OK or not.
Open IE browser, in Tool > Internet Option > Security > Custom Level, select ActiveX
Step 5
and plug-in to be Enable or Prompt.
Recommended IE browser is IE8 and later version.
System Login
4.2
Enter IP address of video matrix platform in the address bar of the browser (take
Step 1
192.168.1.108 for example). Enter http://192.168.1.108 in the address bar, and then
press Enter.
After connection succeeds, the
Device Initialization
interface is displayed. See Figure
Device initialization
Figure 4-1
Set admin user’s password.
Step 2
The password can be set from 8 through 32 non-empty characters and contains at least
two types from capital letter, lower-case letter, number, and special characters
(excluding "'", """, ";", ":" and "&").
Password
and
Confirm Password
shall be the
same. Enter a strong password according to the password strength indication.
Click
OK
.
Step 3